Control your printers from anywhere you want
Effortlessly print thousands of products with one click
No special equipment or technical knowledge required
*No credit card required
We are a big family with all of our users 😀
Thank you for supporting with our journey.
We want to make 3d printing easy for everyone with all knowledge level.
“I was using Octoprint before Repetiti, it was really fighting with raspberry pi and my computer.
After I using Repetiti, I had realised how 3d printing is a fun 😂”
“Repetiti is a a really painless and easy 3d printing software.
After a week I forget sd card and touching printer's buttons 😃 ”
“We manufacture auto spare parts. Thanks to Repetiti, I spend less time on our printers.
I can focus growing my business with peace of mind. ”
No special equipment required (You can use any old pc, raspberry pi or any internet connected device)
You can connect all of your 3d printers including all brands and models Creality, Anycubic, Two Trees. Setup just takes 3 minutes
Access your printers 24/7 via Repetiti anywhere in the world without any technical knowledge. (without any dns/ip configuration)
Start, pause, and cancel prints anytime, anywhere! Control prints from your phone, desktop, or tablet.
No special equipment required (You can use any Android, Ios(Iphone), raspberry pi or any internet connected device)
Setup just takes 1 minute, then you can watch all of your printers any time anywhere.
We value your privacy and take it seriously. All connection with your camera is secure and doesn't stored in our servers. We use webrtc protocol to send stream of your webcam directly from your webcam to you.
Use without any limits.
Don't hasssle with your printer's problems If you have any print quality issues, Repetiti uses its own AI for check-up of your 3d printer.
Repetiti sends commands to your printer and watches your printer's response.
Also Repetiti constantly monitors your printer's temperatures and motors. If any part of your print is likely to fail, Repetiti sends you notifications instantly.
With this check-up you can make predictive maintenance to your 3d printer and prevent print failures before even happening.
No more hassling with complicated design softwares.
You can create any model you want with just a few clicks. Repetiti has integrated Openscad engine. With this capability you can customise and change any model you want with simple intuitive interface.
From creating any model you want to slicing and printing, you can streamline your 3d printing process easily.
Without any limitation.
Slice your models with simple interface. Repetiti automatically adjusts slicer settings according to your printer. Streamline your print process with just a few clicks.
Repetiti uses its custom Cura Slicer Engine with speed and quality improvements, so you don't have to install any program to your computer and you don't have to wait hours for just slicing 😂.
No more hassling with sd cards and slicers.
You can print with one click from thousands of products. Repetiti detects your printer and automatically handles slicing for you.
Also you can store all of your gcode and stl files in one neatly organised place.
With No storage size limit.
When you changed stl file or gcode file, all versions of your files are saved.
You can keep track of changes.
You can remove finished prints with a simple command in Repetiti.Com You don't need to change anything on your computer.
Just sit back and let Repetiti do all hard work!
Connect your telegram or email to Repetiti, Start receiving printer status notifications.
Repetiti supports other notification services such as Techulus Push, Pushbullet and more.
Without any limits
Repetiti has build in queue system, so you don't need to remember what to print next.
Also Repetiti keeps track of your product's stock quantities and intelligently manage your printers to produces required amount for you.
If you are having trouble with power losses, you don't have to worry about it anymore. With Repetiti after a powerloss your printer will continue printing after connected to system.
You just need to click Resume Print on Repetiti Panel, It's just that simple
On Repetiti creating an ecommerce website is never been easier. You just need to fill your address details and Repetiti creates your website automatically.
All your products in Repetiti will be automatically listed on your website.
You can use your custom domain name (e.g. my-3d-shop.com) with no additional charges.
You sell all your products and designs easily on your website.
Reptum is a marketplace for 3d printed products.
You can sell your products on Reptum.
Also if your any of your products is sold in different country, a printer in that country will produce and ship for you.
You will have the ability you sell your products world-wide in an instant of a click.
If you got an order, production of the products will be automatically handled by Repetiti
Repetiti will automatically start your printers according to colors of printers and needed quantity of products.
If any of your printers fail to print, Repetiti automatically starts your other available printers.
So that you can freely focus on your business not order/stock tracking.
Repetiti automatically identifies your printers with either printer-id method or printer-fingerprint method.
So that Repetiti knows which printer is connected to which computer, which filament is on that priter and how much filament is used on that printer.
On a powerloss, Repetiti automatically connects all your printers in a minute and the best part is you dont have to do anything 🙂
You can manage your orders easily with Repetiti.
If you got an order, Repetiti will automatically distribute products to your available printers.
Also Repetiti track how many products are produced and how many should be produced.
At the end of production, Repetiti automatically prints details and shipping information paper form your paper printer.
You can connect your woocommerce website or markatplace shops to Repetiti with one click.
So that if you got an order Repetiti automatically starts production of the order automatically.
If your printer has a problem and you want you check it remotely, Repetiti got your back.
You can connect serial terminal of your printer easily so that you can debug easily.
If you want to change printing temperatures of your gcode files or any other settings, Repetiti does that automatically for you.
You just need to add your new settings and all your new prints will be with these new settings.
If your team has grown in to a big company and you want to restrict access to some or all pages, Repetii has a solution for you
You can create customized pages for each your team member without any coding skill.
You can restrict who can view which page, so that no one can see an unauthorized page.
You can control your iot devices easily with Repetiti.
With Repetiti's built-in browser support just connecting your iot device to your computer is enough. You can control and get information of your iot devices anywhere you want.
Also with Repetiti's simplest api, if your iot can connect to a wifi, it can connect to Repetiti.
Building an iot device is never been easier.
You can track many indicators such as capacity utilization,print error percentage, average print duration etc on any date range.
You can see how well or bad you are doing in recent days.
For example if you are testing a new filament or a setting you can look at how it is performing in your Production Statistics page.
If you want to change filament spools of your printers or auto-home all of them, it can be quite time consuming.
With Bulk Printer management feature, you can send commands to all your printers with just one click.
Repetiti tracks active electricity consumption of your printers.
You can see how much electricity was used by your printers in daily or monthly basis in production statistics page.
Repetiti automatically distributes your production to most available printer automatically.
While automatically starting a print, Repetiti looks to filament color and filament usage of your printer and selects best fitted printer for that production
You can split your 3d printer farm into zones.
Repetiti automatically manages these zones for you.
If your team memeber picks a finished product out of a printer, your paper printer automatically prints the production details with a QR code so that all of the processes of the production can be tracked on Repetiti.
Stop wasting time and money on complicated softwares.
30-day Money back Guarantee!
You can connect Repetiti with just using your browser. Just connect your printer to your computer and visit https://panel.repetiti.com/download_repetiti_client
Or you can install our python program with just 3 simple steps.
You can instal Repetiti connection program to any device you want (for example old pc, raspberry pi, mac or any internet connected device)
Just visit https://panel.repetiti.com/download_repetiti_client link and select your operating system.
You will just install python and simple Repetiti connection python file. That's it ✅
You can print models in thingiverse.com without slicing and hassling with sd card.
First, Repetiti detects your printer
You can select any model you like and Repetiti handles slicing and sending it to your printer
Absolutely no 😃
Absolutely yes, everything in panel can be done with our api.
Currently, some of our customers fully integrated Repetiti.com to their Erp systems.
You can visit our api documentation https://developers.repetiti.com
If you had an order from your products, just change "will be produced quantity" in your product page.
Repetiti automatically manages how many printers should print your product and starts printing your products.
You can get notifications of your printer with email or Telegram / Techulus Push / Pushbullet and more.
You can manage which notifications to get in "Notifications" page in https://panel.repetiti.com/notification_preferences
Repetiti sends notifications below:
In 2020 Repetiti was a intended as an internal 3d printer management system. There are over 150 3d printers in our production center. As a result of large scale mass production, we wanted a system to control and manage all 3d printers.
Firstly, we started using Octoprint. However we have encountered so many problems with Octoprint such as lack of multi-printer management, difficulty of network management etc.
We wanted a 3d printer management software that must be easy to use, support all printer brands and models and fast to use without any special equipment.
After development of a year long journey, Repetiti finally launched at the end of 2021.
We want to make 3d printing fast and easy to everyone with all knowledge level.
If you have any questions, you can fill the form below. We will reply as soon as possible.